
100mm Submersible Linear Position Sender
About Linear Sender
Precision Position Feedback. Fully Submersible. No Mechanical Cables.
Marine Design Corporation's 100mm Submersible Linear Position Sender provides precise electronic position feedback in an extremely rugged, compact package designed specifically for harsh marine environments.
Originally developed for trim tabs and tunnel tabs, the sender eliminates the need for conventional mechanical position-indicator cables and can be adapted to a wide variety of applications requiring accurate linear position feedback.
With a carbon fiber housing, carbon fiber ram, and fully epoxy-encapsulated electronics, the sender is designed for indefinite submersion and continuous operation in demanding marine environments.
100mm of Precise Linear Measurement
With a 100mm measurement stroke, the sender provides highly accurate position feedback for trim tabs, tunnel tabs, actuators, and other mechanisms.
With an RMS error of just 0.125mm and resolution of 0.106mm, even very small changes in position can be accurately detected.
For trim and tunnel tab applications, the sender can be mounted directly at the mechanism and electronically transmit position back to the vessel's control or display system. The waterproof cable gland is compatible with all high performance trim tabs.

No mechanical indicator cable required.
Programmable Output Direction
Not every installation operates in the same direction.
The sender can be programmed so its 0.5–4.5V output either increases or decreases as the ram extends.
This is particularly valuable for trim tab and tunnel tab applications, where mechanical orientation may cause extension to represent either increasing or decreasing tab position.
Instead of designing the installation around the sensor, the sensor can be configured for the installation.
Specifications
-
Input Voltage: 5 VDC
-
Output: 0.5–4.5 VDC
-
Stroke: 100mm
-
RMS Error: 0.125mm
-
Resolution: 0.106mm
-
Submersion: Designed for indefinite submersion
-
Housing: Carbon Fiber
-
Ram: Carbon Fiber
-
Electronics: Fully Epoxy Encapsulated
-
Output Direction: Programmable —
increasing or decreasing voltage with extension
Features
-
Designed for indefinite submersion
-
100mm measurement stroke
-
Precision analog position feedback
-
0.125mm RMS error
-
0.106mm resolution
-
5 VDC input
-
0.5–4.5 VDC output
-
Programmable output direction
-
Carbon fiber housing and ram
-
Fully epoxy-encapsulated electronics
-
Lightweight and corrosion resistant
-
Eliminates conventional mechanical position-indicator cables
-
Ideal for trim tabs and tunnel tabs
-
Adaptable to actuators and other linear position applications
Designed and Manufactured by Marine Design Corporation
Eliminate the Cable
Mechanical position-indicator cables add complexity to an installation. They require routing through the vessel and introduce another mechanical component that can corrode, bind, wear, or require adjustment.
​
The MDC Submersible Linear Position Sender replaces that mechanical connection with precise electronic position measurement directly at the tab.
Mount the sender at the mechanism, connect three wires, and get accurate position feedback without running a mechanical indicator cable through the boat.
​
PRICING: $379.99
Submersible. Precise. Corrosion resistant. No mechanical cable.
